이하 amplifier_gain? 모두? or 그게 아닌걸 나누어야? 암튼 이득이란 대개 증폭기,amplifier i.e. 연산증폭기,opamp가 신호(전압/전류/전력)을 몇 배로 해주느냐에 대한 얘기임.
따라서 단위가 상쇄되므로 dimensionless_quantity.
따라서 단위가 상쇄되므로 dimensionless_quantity.
The voltage gain, is defined as
gain을 데시벨,decibel(dB)로 나타내면 { dB = 20 log (V/1V) or 20 log (I/1A), dBm = 20 log (V/1mV) or 20 log (I/1mA), dBW = 10 log (P/1W) ?? }
전압,voltage
}
}
(이 둘은 see Hayt 9e ko p219)
power gain ≡ load power / input power
where
: the current that the amplifier delivers to the load. 여기서 load는 이고, 이다.
: the current the amplifier draws from the signal source.
(Sedra)
where
: the current that the amplifier delivers to the load. 여기서 load는 이고, 이다.
: the current the amplifier draws from the signal source.
(Sedra)
where
: the current that the amplifier delivers to the load. 여기서 load는 이고, 이다.
: the current the amplifier draws from the signal source.
전력이득/전류이득/전압이득 사이의 관계: 비슷한 관계가 있다.
전력이득 = 전류이득 × 전압이득.
(Sedra 1.4.4)
전력이득 = 전류이득 × 전압이득.
(Sedra 1.4.4)
gain은 dimensionless number이다. 전압이득은 V/V, 전류이득은 A/A, 전력이득은 W/W이므로.
amplifier_gain을 로그,log를 써서 데시벨,decibel로 자주 나타낸다.
voltage gain in decibels = 20 log |Av|
current gain in decibels = 20 log |Ai|
power gain in decibels = 10 log Ap
위에서 전압이득과 전류이득에 절대값,absolute_value기호가 붙은 것은 가 음수,negative_number일 수 있기 때문.
(Sedra 1.4.5)
amplifier_gain을 로그,log를 써서 데시벨,decibel로 자주 나타낸다.
voltage gain in decibels = 20 log |Av|
current gain in decibels = 20 log |Ai|
power gain in decibels = 10 log Ap
위에서 전압이득과 전류이득에 절대값,absolute_value기호가 붙은 것은 가 음수,negative_number일 수 있기 때문.
(Sedra 1.4.5)
아래는 별도의 분야?